Filter
Top Products
What to do if...
Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer. Before contacting your local Service
Centre, please carry out the checks listed below.
During machine operation it is possible that the red light of button 8 blinks, at the
same time some acoustic signals sound and one of the following alarm codes
appears on the display to indicate that the machine is not working:
● E10: problem with the water supply
● E20: problem with water draining
● E40: door open.
Once the problem has been eliminated, press button 8 to restart the programme. If
after all checks, the problem persists, contact your local Service Centre.
Malfunction Possible cause Solution
The washer-dryer does
not start:
● The door has not been
closed. E40.
● The plug is not properly
inserted in the power
socket.
● There is no power at the
socket.
● The main fuse or the
fuse in the plug has
blown.
● The selector dial is not
correctly positioned and
button 8 has not been
pressed.
● The delay start has been
selected.
● The Child Safety Lock
has been activated.
● Close the door firmly.
● Insert the plug into the
power socket.
● Please check your
domestic electrical
installation.
● Replace the fuse.
● Please turn the selector
dial and press button 8
again.
● If the laundry are to be
washed immediately,
cancel the delay start.
● Deactivate the Child
Safety Lock.
The machine does not
fill:
● The water tap is closed.
E10
● The inlet hose is
squashed or kinked. E10
● The filter in the inlet hose
is blocked. E10
● The door is not properly
closed. E40
● Open the water tap.
● Check the inlet hose
connection.
● Clean the water inlet
hose filter.
● Close the door firmly.
what to do if... electrolux 31
132962470.qxd 11/08/2008 11.20 Page 31