Electrolux EWW 167443 W Washer/Dryer User Manual


 
DISPLAY
7.3 7.4 7.1
7.2
The display shows the following informa-
tion:
7.1:
Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample 2.05 ). The duration is calculated
automatically on the basis of the maxi-
mum recommended load for each type of
fabric. After the programme has started,
the time remaining is updated every mi-
nute.
Selected drying time
After selecting a drying programme, the
drying time is displayed in minutes or in
hours and minutes (e.g. 130 mins =
2.10 ). After the programme has started
the time remaining is updated every mi-
nute.
Delayed start
The Selected delay set by pressing the
relevant button appears on the display for
few seconds, then the duration of the se-
lected programme is displayed again.
Alarm codes
In the event of operating problems, some
alarm codes can be displayed, for exam-
ple E20 (see paragraph «What to do
if...»).
Incorrect option selection
If an option which is not compatible with
the set wash programme is selected, the
message Err is displayed at the bottom
of the display for a few seconds and the
integrated red light of button 8 start flash-
ing.
End of programme
When the programme has finished three
flashing zeros are displayed, the pilot light
9 and the pilot light of button 8 go out
and the door can be opened.
7.2: Washing programme phase icons
Wash
Rinses
Drain
Spin
Dry
By selecting the wash programme, the
washing programme phase icons corre-
sponding to the various phases making up
the programme are shown in the bottom
part of the display. After having pressed
button 8 only the icon of the running phase
stays on.
7.3: Soil degree icons
Intensive
Normal
Daily
Light
Quick
Super Quick
Refresh
Super Refresh
When selecting a programme on the dis-
play appears an icon indicating the degree
electrolux 7