Filter
Top Products
care and cleaning electrolux 33
• replace the filter into the pump
paying attention to insert it properly.
When done, screw it firmly
• replace the emergency emptying cap
into the filter cover and fix it firmly
P1229
P1228
P1227
P1226
• Close the pump door.
Warning!
When the appliance is in use and
depending on the programme selected
there can be hot water in the pump.
Never remove the pump cover during a
wash cycle, always wait until the
appliance has finished the cycle, and is
empty. When replacing the cover,
ensure it is securely retightened so as
to stop leaks and young children being
able to remove it.
Cleaning the water inlet filter
If your water is very hard or contains
traces of lime deposit, the water inlet
filter may become clogged.
It is therefore a good idea to clean it
from time to time.
Turn off the water tap. Unscrew the
water inlet hose. Clean the filter using a
hard bristle brush. Tighten up the inlet
hose.
P1230
132970420_GB.qxd 02/08/2007 15.28 Pagina 33