Filter
Top Products
use electrolux 15
After the programme has started, the
time remaining is updated every minute.
Selected drying time
After selecting a drying programme, the
drying time is displayed in minutes or in
hours and minutes (max
130 mins).
After the programme has started the
time remaining is updated every
minute.
Washing/Drying programme phase
icons
By selecting the programme, the
washing and/or drying programme
phase icons corresponding to the
various phases making up the
programme are shown in the bottom of
the display.
After you have pressed the Start/Pause
button and the machine has started,
only the phase running icon stays on.
When the programme has finished, 3
flashing zeros «
0.00» appear on the
display.
2.05
2.05
Delay
The selected delay (20 hours max) set
by means of the relevant button appears
on the display for about 3 seconds, then
the duration of the previously selected
programme is displayed.
The delay time value decreases by one
unit every hour and then, when 1 hour
remains, the time decreases every
minute.
Incorrect option selection
If an option which is not compatible with
the set washing programme is selected,
the message Err is displayed at the
bottom of the display for about 2
seconds and the integrated red
Start/Pause light starts flashing.
Alarm codes
In the event of operating problems,
some alarm codes can be displayed, for
example
E20 (see paragraph
“Something not working”).
E20
132970420_GB.qxd 02/08/2007 15.27 Pagina 15