Filter
Top Products
use electrolux 17
Altering an option or a running
programme
It is possible to change any option
before the programme carries it out.
Before you make any change, you must
pause the washer-dryer by pressing the
Start/Pause (Inicio/Pausa) button.
(Only the Time Manager option
cannot be modified after the programme
has started. )
Changing a running programme is
possible only by resetting it. Turn the
programme selector dial to O and then
to the new programme position. Start
the new programme by depressing the
Start/Pause (Inicio/Pausa) button
again.The washing water in the tub will
be not emptied out.
Interrupting a programme
Depress the Start/Pause (Inicio/Pausa)
button to interrupt a programme which
is running, the corresponding light starts
to flash. Depress the button again to
restart the programme.
Cancelling a programme
Turn the selector dial to O to cancel a
programme which is running. Now you
can select a new programme.
Opening the door after the
programme has started
First set the machine to pause by pressing
the Start/Pause (Inicio/Pausa) button.
If the door cannot be opened, this means
that the machine is already heating, that
the water level is above the bottom edge
of the door or that the drum is turning.
If you cannot open the door but you need
to open it you have to switch the machine
off by turning the selector dial to O.
After about 3 minutes the door can be
opened (pay attention to the water
level and temperature!).
Fabric Soil Level
Cottons
90C
X X X X X X
60°C
X X X X X X
40°C
X X X X X X
50°C
X X X X X X
30°C
X X X X X X
Synthetics
Delicates
60°C
X X X X
50°C
X X X X
40°C
X X X X
40°C
X X X X
30°C
X X X X
30°C
X X X X
132970420_GB.qxd 02/08/2007 15.27 Pagina 17