Filter
Top Products
14 electrolux use
Alarm codes
In the event of operating problems,
some alarm codes can be displayed, for
example
E20 (see paragraph
“Something not working”).
End of programme
When the programme has finished a
flashing zero is displayed, the (Door)
icon desappears and the door can be
opened.
Heating phase
During the washing cycle the display
shows the temperature icon animated
to indicate that the appliance has
started the heating phase of the water
in the tub.
Select the Start/Pause
To start the selected programme, press
the Start/Pause button; the green pilot
light stops flashing.
The “door” icon appears on the
display to indicate that the appliance
starts operating and the door is locked.
To interrupt a programme which is
running, depress the Start/Pause
button: the green pilot light starts to
flash.
To restart the programme from the point
at which it was interrupted, press the
Start/Pause button again.
If you have chosen a delayed start, the
machine will begin the countdown.
If an incorrect option is selected, an
integrated red pilot light of the “Start/
Pause” button flashes 3 times the
message Err is displayed for about 2
seconds. Three acoustic signals sound.
132979391_EN.qxd 01/12/2006 12:36 Pagina 14