Electrolux EDI 96150 Clothes Dryer User Manual


 
installation safety instructions electrolux 39
Installation safety instructions
Important! The appliance must be
moved in vertical position for trans-
port.
Before first starting up, all parts of
the transport safety equipment must
be removed. The machine may oth-
erwise be damaged.
The appliance must not be built-in.
Before starting up for the first time,
ensure that the nominal voltage and
type of current specified on the ap-
pliance’s rating plate match the nom-
inal voltage and type of current at the
installation site. The electrical fuse
required can also be found on the
rating plate.
Always connect the machine to an
earthed socket in accordance with
current wiring regulation.
The manufacturer declines any re-
sponsibility for damage or injury
through failure to comply with the
above safety precaution.
With permanent connections: A per-
manent connection may only be es-
tablished by an authorised specialist
electrician.
Do not install appliance in rooms at
risk of frost.
Do not install the appliance behind
a door that locks
a sliding door
a door with a hinge that lies oppo-
site the hinge of the appliance.
The door of the appliance must not
be able to be blocked by house
doors or other appliance doors.
Do not install on a carpet with a high
pile. Air circulation at the ventilation
holes will be hindered.
Ensure that the appliance is not
standing on the mains cable.
Install the machine horizontally.