Filter
Top Products
16 electrolux overview of iron aidtm programmes
Overview of Iron Aid
TM
programmes
All information on applications is for
guidance only. Smoothing results
may vary depending on the selected
programme and especially the fit-
tings and material properties of the
textile. The results can be improved
if necessary by using different pro-
grammes and steam volumes. For
example, some textiles containing
more than 20% synthetics but with
the right fittings may behave more
like cotton textiles in an Iron Aid
programme. You may therefore get
better smoothing results by select-
ing a cotton Iron Aid programme.
Given the wide range of different
textile grades and properties that
can be manufactured today using
different mechanical and chemical
processes, we recommend running
the first few Iron Aid programmes at
low steam levels and with a small
number of garments that are as sim-
ilar as possible. Later, you can care-
fully start to vary the conditions of
Iron Aid programmes to learn from
experience how to get the best re-
sults from the volume of laundry
loaded, the quality of the textiles
and the most suitable steam levels
and Iron Aid programmes.
Please also note the accompanying
‘Textile Guide’.
Programmes
Max. load *
(Weight when dry)
Additional
functions
Application/properties
LOAD
(CARGA)
BUZZER
(ALARMA)
COTTON
(ALGODÓN)
1,0kg • •
For 1- 5 cotton shirts. Min. 80% natural
fibres (cotton, linen etc).
wet,
dry
SYNTHETICS
(SINTÉTICOS)
1.0kg • •
For 1- 5 synthetic shirts. Max. 20% nat-
ural fibres (cotton, linen etc).
wet,
dry
COTTON
(ALGODÓN)
3,0kg • •
For smoothing cotton garments. Min.
80% natural fibres (cotton, linen etc).
wet,
dry
SYNTHETICS
(SINTÉTICOS)
1.5kg • •
For smoothing easy-care garments.
Max. 20% natural fibres (cotton, linen
etc).
wet,
dry
REFRESH
(VENTILACIÓN)
• •
For one suit or up to two suit jackets or
pairs of trousers or similar garments.
Also suitable for removing odours. For
dry garments only
dry