Filter
Top Products
Operating Instructions
22
Start Washing Program
0
1.
Check whether the water tap is opened.
2.
Start washing program:
Press START/PAUSE button.
The washing program is started or starts at the end
of the delay time set.
3
If the DOOR/LIGHT display flashes red when the
START/PAUSE button is pressed, the door is not properly closed. Close
the door firmly and press the START/PAUSE button again.
If a delay time has been selected:
The selected delay time runs, and the time remaining until program
start (in full hours) appears in the multi-display. During this time, wash-
ing can be added or delay time can be changed or deleted.
Add washing: press the START/PAUSE button, the door can be
opened. Then close the door and press the START/PAUSE button
again.
Change or cancel the time delay: press the DELAY TIMER button
repeatedly until the desired time is displayed; when the program
duration is displayed (such as
110
), the washing program starts
without delay.