Filter
Top Products
Page 5
DRAIN HOSE
• Connect the drain hose to the drain outlet at the rear of
the machine and secure it with the hose clamp supplied.
• Fit the flexible hose guide.
•
Hook the outlet end of the drain hose over the lip of a
sink or outlet pipe.
SINK OR LAUNDRY TUB DRAIN
• The top lip of the sink must be at least 860mm (A)
above floor level and not higher than 1300mm.
PIPE DRAIN
• The minimum inside diameter of the pipe drain should
be 30mm and the pipe should be able to drain 30 litres
per minute.
• The top lip of the pipe should be at least 860mm (B)
above floor level and not higher than 1300mm.
NOTES
• The Highest point of the drain hose should be be-
tween 1.0 and 1.3 metres above floor level. If it is not,
the machine will malfunction.
• The drain hose must pass through the hose guide
and not protrude more than 55mm from the end of
the guide. If necessary the drain hose may be
trimmed to suit.
Installation continued
A
B