Filter
Top Products
Page 17
The loading door will not open if the water
temperature in the machine is high or the
water level is above the door opening.
The Door Locked symbol appears when the
loading door is locked. This symbol will flash
until the loading door is ready to be opened,
either when programme completes or when
the machine is paused. Do not force open
the loading door. The Symbol will disappear
when the door is ready to open. Only open
the door when the symbol disappears.
5.16 Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause / Cancel button to
switch the machine to pause mode. The
Pause symbol appears on the display
indicating that the machine is paused. The
Start symbol disappears.
Changing the speed and temperature
settings for auxiliary functions
Depending on the step the programme has
reached, you may cancel or activate the
auxiliary functions; see, "Auxiliary function
selection".
You may also change the speed and
temperature settings; see, "Spin speed
selection" and "Temperature selection".
Adding or taking out laundry
Press the Start / Pause / Cancel button to
switch the machine to pause mode. The
programme follow-up light of the relevant
step during which the machine was switched
into during the pause mode will flash. Wait
until the Loading Door can be opened. Open
the Loading Door and add or take out the
laundry. Close the Loading Door. Make
changes in auxiliary functions, temperature
and speed settings if necessary. Press the
Start / Pause / Cancel button to start the
machine.
5.17 Child Lock
Use the Child Lock function to prevent
children from tampering with the machine,
thus preventing any changes being made to
a running programme.
To activate the Child Lock
Press and hold the 2nd and 4th Auxiliary
Function buttons for 3 seconds. “Con”
appears on the display.
To deactivate the Child Lock:
Press and hold 2nd and 4th Auxiliary
Function buttons for 3 seconds. “COFF”
appears on the display.
The same phrase will appear on the display
if you press any button when Child Lock is
enabled.
Switch the machine on and off with the On /
Off button when the Child Lock is active.
When you switch the machine on again, the
programme will resume from where it has
stopped.
Do not forget to disable the child lock at the
end of the programme if it was enabled
before. If the child lock is not disabled the
machine will not allow you to select a new
programme.