Filter
Top Products
Page 15
5.11 Auxiliary function selection
Select the desired auxiliary functions before
starting the programme. Auxiliary functions
suitable to the running programme may also
be selected or cancelled by pressing the
Start / Pause / Cancel button whilst the
machine is operating.
Depending on the programme, press a, b, c
or d buttons to select the desired auxiliary
function. The symbol of the selected
auxiliary function appears on the display.
Prewash
A Prewash is only worthwhile for heavily
soiled laundry. Not using Prewash will save
energy, water, detergent and time.
F1 appears on the display when you select
this function (a).
• Quick Wash
This function can be used for Cottons and
Synthetics programmes. It decreases
washing times and also the number of
rinsing steps for lightly soiled laundry.
F2 appears on the display when you select
this function (b).
• Rinse Plus
This function enables the machine to rinse
again in addition to the rinse already
performed after the main wash. Detergent
remnants on the laundry can be reduced in
this way. (Babies clothing etc.).
F3 appears on the display when you select
this function (c).
• Anti-Creasing
Drum movement is reduced and the spinning
speed is limited to help prevent creasing on
clothes being washed. Washing is done with
a higher water level. F4 appears on the
display when this function is selected (d).
• Rinse Hold
If clothes are not going to be unloaded
immediately after the programme completes,
use the rinse hold function to keep laundry in
the final rinsing water to help prevent
wrinkling. Press the Start / Pause /Cancel
button after this process to drain the water
without spinning your laundry. The
programme will resume and complete after
draining the water. To spin the laundry held
in the water, adjust the Spin Speed and
press the Start / Pause / Cancel button.
The programme resumes, water is drained,
laundry is spun and the programme
completes.
• Rinse Plus
This function helps to remove pet hair on
your garments. When selecting this function,
Prewash and Extra Rinse steps are added to
the normal programme. Washing is
performed with more water (30%) thus
removing pet hair more effectively.
5.12 Time display
The remaining time to complete the
programme appears on the display while the
programme is running. Time is displayed as
“01:30” in an hours and minutes format.
Some functions cannot be selected together.
If a second auxiliary function conflicting with
the first one is selected before starting the
machine, the function selected first will be
cancelled and the second auxiliary function
selection will remain active. For example, if
you want to select Quick Wash after you have
selected the Prewash, Prewash will be
cancelled and Quick Wash will remain active.
An auxiliary function that is not compatible
with the programme cannot be selected. (See
“Programme and consumption table”)
Auxiliary Function buttons may vary according
to the model of the machine.
When you select this function, load your
machine with half of the maximum laundry
specified in the programme table.
Never wash your pets in the washing
machine.
Programme time may differ from the values in
the “Programme and consumption table”
depending on water pressure, water hardness
and temperature, ambient temperature,
amount and type of laundry, auxiliary functions
selected and changes in the mains voltage.