Filter
Top Products
Page 9
Time delayed start
The wash cycle completion time may be delayed by 2 to 48 hours. This feature is particu-
larly useful when you are at work and only want the machine to finish washing just be-
fore you arrive home.
To cancel the “time Delayed Start” press the power button. Wait five seconds before
pressing the power button once more to resume
EXAMPLE: To set a completion time 8 hours from the present, proceed as follows:
WOOL PROGRAMME ( The water temperature is automatically set to COLD )
Wash 1.5 kg maximum. Do not wash chamois or leather.
Customising programmes
SELECTION PROCEDURE
WASH ONLY
RINSE ONLY
SPIN ONLY
WASH AND
RINSE
WASH AND
SPIN
RINSE AND
SPIN
WASH, RINSE
AND SPIN
WASH
RINSE
SPIN
WASH
RINSE
WASH
SPIN
RINSE
SPIN
WASH
RINSE
SPIN
• Press the Start Hold pad
to begin the programme.
• Press the Start Hold pad
once more to interrupt the
programme and stop the
machine.
• Press the Start Hold pad
once more to continue the
programme from where it
was interrupted.
• At the end of the cycle a
buzzer will sound and the
power will be switched
off automatically.
Press the
Power
ON / OFF
pad.
REMAIN
REMAIN
8
Display Set to 8
Display
Select a
programme
PROGR.
START
HOLD
Select WOOL
NOTE: Water temperature is automatically set at COLD and LOW
Water level is not selectable.
PROGR.
DELAY
START
HOLD
START
HOLD