Filter
Top Products
27
* RINSE+SPIN (for DWD-UD121X)
Put the laundry into the Drum and put softerner into the detergent case.
Then close the Door.
• Softener should be below 'MAX' level.
Press the Power button.
• The LED shows only '- --' signal.
Select the program you want using the program selection dial.
• If you press 'RINSE+SPIN' button without selecting program, the 'NORMAL' program
is selected as default program.
Press the 'RINSE+SPIN' button.
• '1' time rinse and '800' rpm spin speed and 'Cold' water temperature are selected
automatically.
• '400' rpm spin speed is selected in 'DELICATE' program.
• If you want to change the Rinse time(s) and Spin condition, press each
corresponding button.
Press the 'Start/Pause' button.
• The washer will be operated with locking Door.
1
2
3
5
4
Note
• The water temperature selecting is possible during this process.
• You can’t use when you select ‘QUICK 30’ or ‘TUB CLEAN’ course.
• In ‘DELICATE’ course, spin speed selectable only ‘Low’ or ‘Rinse Hold’.
• In ‘BLANKET’ course, spin speed selectable only ‘Medium’ or ‘Low’ or ‘Rinse Hold’.