Filter
Top Products
22
11. BABY CARE
Note
• If you want to change the setting program during operation, press the 'Start/Pause' button to hold the
operation and change the program you want to change by pressing each correspinding button.
• If you want to add the clothes during operation, press 'Start/Pause' button and 'Door unlock' button, then
open the door and put the clothes into the drum and then close door and press 'Start/Pause' button again.
• Please wash seperated colorful clothes
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the door.
• Put the detergent into the main wash room(II marking).
• Softener should be below 'MAX' level.
• When you want to use bleach put it into the main wash room with detergent
Press the Power button
• The LED shows only '- --' signal.
Select the 'Baby Care' program using the program selection dial
• Main wash and 4 times rinse and 'Medium' spin speed and 40°C water temperature
"Steam : Strong" are selected automatically.
• If you want to change the 'Washing course' and 'Rinse time' and Spin speed' and
'water temperature',select program what you want to change by pressing each
button.
Press the 'Start/Pause' button
• The washer will be operated with locking door and supplying water after sensing the
amount of laundry automatically.
1
2
3
4