Filter
Top Products
29
RINSE+SPIN
1
2
3
4
5
Put the laundry into the Drum and put softerner into the detergent case.
Then close the Door.
• Softener should be below ‘MAX’ level.
Press the Power button.
• The LED shows only ‘- --’ signal.
Select the program you want using the program selection dial.
• If you press ‘RINSE+SPIN’ button without selecting program, the ‘Cotton’ program is selected
as default program.
Press the ‘RINSE+SPIN’ button.
• ‘1’ time rinse and ‘Medium’ rpm spin speed and ‘Cold/Cold’ water temperature are selected
automatically.
• ‘Low’ rpm spin speed is selected in ‘WOOL’ and ‘DELICATE’ program.
• If you want to change the Rinse time(s) and Spin condition, press each corresponding button.
Press the ‘Start/Pause’ button.
• The washer will be operated with locking Door.
Note :
• The water temperature selecting is possible during this process.