Filter
Top Products
28
1
2
3
4
Put the laundry into the Drum and close the Door.
Press the Power button.
• The LED shows only ‘- --’ signal.
Select the ‘SPIN CONDITION’ you want by pressing ‘SPIN’ button.
• The ‘Cotton’ program is selected automatically.
• The water temperature is selected to ‘Cold/Cold’ automatically.
Press the ‘Start/Pause’ button.
• The washer will be operated with locking Door.
ONLY SPIN
1
2
3
4
Put the laundry into the Drum and put the detergent and softerner into the detergent case.
Then close the Door.
• Put the detergent into the main wash room(I I marking) and prewash room(I marking) in the
detergent case.
• Softener should be below ‘MAX’ level.
• Put the detergent into the pre wash room(I marking) only if you want to add prewash.
• When you want to use bleach, put it into the main wash room (I I marking) with detergent.
Press the Power button.
• The LED shows only ‘- --’ signal.
Press the Custom button
• '18:88' or 'CEP' will be showen by turns.
Press Start/ pause Button
CUSTOM PROGRAM
Note :
use to memorize frequently used program
To make a Custom Program.
1. Select a cycle. ('18:88'or'CEP' will be showen by turns)
2. Select Wash/Rinse Temperature, Spin Speed, and Soil Level.
3. Select other desired Options.
4. Press Start/Pause Button.