Filter
Top Products
11
The Controls - Reverse (2-way Tumble models)
Timer control
The Cool Tumble
phase
Heat Switch (OUT low heat, IN high heat)
Turn the timer clockwise to select the required drying time.
The drying time for both heat settings is controlled by the timer. All you
have to do is turn the Timer Control clockwise until the required time
appears in line with the indicator.
Never wind the timer control anti-clockwise.
This operation also starts the dryer, provided the door is closed and
the machine is plugged in.The “Guide To Drying Times” section will tell
you how much time you’ll need for various loads.
About 10 minutes before the programme is completed, the heating
elements will be switched off and the programme enters the final ‘Cool
Tumble’ phase. During this phase the fabric is cooled. You should
always allow the dryer to complete this phase.
By opening the door, the dryer will stop and you can check the
dryness of the load a often as you wish and, if you want, remove (or
add) some items before they are fully dry.(This is particularly useful for
a mixed load where you want to iron some items, but others are to be
fully dried).
We recommend that the clothes are removed immediately this
programme is finished to minimise creasing.
Indicator