Filter
Top Products
10
Wall Mounting Your XLC2
Wall mount your telephone as shown on the enclosed Quick
Start guide. (This is optional.)
1. Follow the instructions in the Installation section on page 8
to remove the base and handset from the base – steps 1, 4, 6.
2. Unplug the long phone line cord from the phone jack
located on the back of your XLC2. Plug one end of the short
phone line cord into the same jack identied by LINE on the
back of your base.
3. Install the XLC2 base onto the wall mount bracket as
shown on page 11. Guide the short phone cord through the
wall mount bracket as shown in the diagram.
4. Using a screwdriver, loosen the screws on your phone wall
outlet (1-2 turns).
5. Plug the loose end of the short phone cord into the wall
phone outlet.
6. Attach the wall mount bracket (with the XLC2 base) onto
the wall phone outlet.
7. Plug the power adapter into a wall electrical outlet.
8. Pull the handset’s battery tab located on the bottom of the
device in the direction of the arrow.
9. Place the handset in the base and allow 10 hours for full
charge.
XLC2