Filter
Top Products
3
A
A
Connection of a central operating
panel for coinmachines (option)
At the backside above the main connectors, you fi nd a printboard, to which the
central operating panel for coinmachines can be connected.
The right connectors form a potential free output contact as a result of which
the operating
panel detects when the machine is activated or not.
The left connectors receive the signal, by means of which a machine is chosen
through the operating panel.
There are 3 different variations possible according to the output voltage of the
operating panel.
Remark :
If a machine is equipped with this kind of printboard or if a print-
board has been built in, the resistance of the cycle contact (A) may
no longer be present on the main printboard.
When this resistance is present, it has to be cut out of the main
printboard.