Chauvet 1200E Washer User Manual


 
Setup
-8- Legend™ 1200E Wash User Manual Rev. 02e
Mounting
Before mounting this fixture, read and follow the safety recommendations indicated in
the Safety Notes section (page 2 of this manual).
Orientation
Always mount this fixture in any safe position while making sure that there is adequate
room around it for ventilation, and for the fixture’s head to pan and tilt freely.
Make sure to mount this fixture away from any flammable material as indicated in the
Safety Notes section (page 2 of this manual).
Rigging
The Legend™ 1200E Wash comes with two omega brackets and two clamps. You will
have to use two mounting points per fixture. You can also mount the Legend 1200E
Wash on the floor or any other firm, horizontal surface. CHAUVET® recommends
following the general guidelines below when mounting the Legend™ 1200E Wash.
When selecting an installation location, consider ease of access to the fixture for
operation, programming adjustments, and routine maintenance.
Never mount the fixture in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
Make sure that the location where you are mounting the fixture can support its
weight. Please see the Technical Specifications section of this manual for the weight
requirement of this fixture.
Only mount this fixture where the base is in a horizontal position, either hanging
or standing, as indicated in the diagram below. Doing otherwise may cause
damage to the fixture and void its warranty.
Product Mounting
Diagram
Safety Cable Installation
Diagram
Standing
position
Standing
position
Hanging
position
Safety
cable
Omega
brackets with
clamps