Filter
Top Products
12
Operating Suggestions for Loading
When handling heavy loads, be sure to lower
lift arms slowly. This is known as feathering
the hydraulic lever. If load is lowered too fast
and stopped suddenly, excessive shock loads
are created which can damage loader or
tractor.
When loading bucket, drive straight into
material. Attempting to turn tractor while
loading bucket can cause damage to both the
loader and tractor.
Come in level:
NOTE: Bottom surface of bucket is parallel to
line on motion
Work both levers back to direct pressure to
both cylinders.
Combined action of lift and bucket cylinders
increases loading efficiency.
DO THIS! NOT THIS!
A straight bottom offers more resistance to lift.
To increase loading efficiency, minimize angle of
turn and length to run between pile and
spreader.
Leave material which drifts over side of bucket
for final clean-up.