Filter
Top Products
bühler
Allied Front-End Loader
- 3 - P4094
Specification Chart
NOTE: Specifications are subject to change without notice or obligation.
Item Description
2595/2596
REG
2595/2596
TSL
2595S/2596S
REG
2595S/2596S
TSL
A Maximum lift height to pivot pin [in/cm] 145/368 145/368
142/361 142/361
B Maximum lift height under level bucket [in/cm] 135/343 135/343
132/335 132/335
C Clearance with bucket dumped [in/cm] 112/285 112/285
108/274 108/274
D Reach at maximum lift height [in/cm] 29/74 28/71
32/81 32/81
E Maximum dump angle [deg] 48 49
46 48
G Maximum rollback angle [deg] 38 38
38 38
H Digging depth [in/cm] 7.0/18 7.0/18
5.5/14 5.5/14
J Overall height in carry position [in/cm] 85/216 87/221
85/216 86/218
U Lift capacity to maximum height - at pivot pin [lb/kg] 3425/1554 5355/2429
3465/1572 5410/2454
optional cylinder
5395/2447
54552474
V Lift capacity to maximum height [lb/kg] 2330/1057 3645/1653
2335/1059 3650/1656
optional cylinder
3670/1665
3680/1669
W Lift capacity to 59 in. height - at pivot pin [lb/kg] 3995/1812 6220/2821
4200/1905 6510/2953
optional cylinder
6280/2849
6570/2980
X Lift capacity to 59 in. height [lb/kg] 3050/1383 4750/2155
3170/1438 4920/2232
optional cylinder
4795/2175
4965/2252
Y Breakout force - at pivot pin [lbf/daN] 4795/2132 7425/3303
5180/2304 7970/3545
optional cylinder
7490/3397
8040/3576
Z Breakout force [lbf/daN] 3480/1548 5385/2395
3695/1643 5690/2530
optional cylinder
5435/2418
5735/2551
VV Bucket rollback force at maximum height [lbf/daN] 2760/1228 4310/1917
2725/1212 4255/1893
optional cylinder
4255/1893
4200/1868
XX Bucket rollback force at 59 in. lift height [lbf/daN] 4240/1886 6380/2837
4210/1873 6350/2824
optional cylinder
6445/2867
6400/2847
ZZ Bucket rollback force at ground line [lbf/daN] 4335/1928 6295/2800
4340/1930 6300/2802
optional cylinder
6590/2931
6595/2933
Raising/Lowering time [sec] 4.4/2.8 6.3/4.2 4.4/2.8 6.3/4.2
optional cylinder
6.3/4.2 6.3/4.2
Bucket dumping/rollback time [sec] 3.7/2.3 4.1/2.7 3.7/2.3 4.1/2.7
optional cylinder
5.3/3.5 5.3/3.5
Lift cylinder tube/shaft size [in] 2.50/1.50 3.00/1.75 2.50/1.50 3.00/1.75
optional cylinder
3.00/1.75 3.00/1.75
Lift cylinder stroke/retracted length [in] 25.75/38.00 25.75/38.00 25.75/38.00 25.75/38.00
Bucket cylinder tube/shaft size [in] 2.50/1.50 3.00/1.75 2.50/1.50 3.00/1.75
optional cylinder
3.00/1.75 3.00/1.75
Bucket cylinder stroke/retracted length [in] 21.50/31.00 16.75/46.25 21.50/31.00 16.75/46.25
Mounting Height (+/- 3.0) [in] 48
Hydraulic pressure rating/flow rate [psi]/[gpm] 2500/15
Tractor size [H.P. @ normal duty] 50-120
Bucket size [in/cu.ft.] 60/19.0
- * Indicates bucket size used for calculations
72/23.8
of lift capacities and rollback forces.
84/27.0*
Weight (with bkt & mtg kit) [lb/kg] 2200/998