Filter
Top Products
BEFORE USING FOR THE FIRST TIME
Before beginning to use your dryer for the first
time:
1.
Check to make sure that the voltage on which
the dryer is to operate is the same as shown
on the rating plate.
GETTING STARTED
Below,
in
order to get started, you will find a summary
of how to operate the clothes dryer. Also, refer to the
CYCLE SELECTION CHART, Table
1.
• Turn On
the
Dryer
Press the "ON/OFF" button. The indicator light
will become illuminated and the indicator above
the "START" button will begin to flash.
•
Check
the
Lint
Filter
The lint filter, located in the door, should
be
cleaned after or before each load.
• Load
the
Dryer
Load the items
in
the dryer.
•
Add
Fabric
Softener
Sheet
If a fabric softener sheet is to be added it should
be
done after loading the dryer.
• Close
the
Dryer
Door
• Select
Cycle
Desired
See CYCLE SELECTION CHART, Table
1,
and
following section titled OPERATION for program
recommendations.
• Select
Additional
Functions
(if
desired)
See following section titled OPERATION.
2.
Wipe the interior of the drum with a damp
cloth.
• Press
the
"START"
Button
The "START" indicator lamp will stop flashing and
the dryer will start. If one
of
the Auto-Cycles have
been selected the Duotronic system will monitor
the moisture level and display the progress
of
the
drying in the "Moisture Level Indicator Lights." If a
timed cycle has been selected the minutes
remaining will
be
displayed
in
the "Cycle
Countdown Display."
The cycle will continue to the end, when the
"End" indictor lamp will become illuminated. And,
if the "End
of
Cycle Signal" has been selected a
signal will sound. - See following section
OPERATION on how
to
set or turn of the "End
of
Cycle" signal.
• Depress
the
"DOOR"
Button
The door will open.
• Remove the
Laundry
from
the
Dryer
• Clean
the
Lint
Filter
• Turn Off the Dryer
Depress the "ON/OFF" button.
5