Filter
Top Products
If the WFR 2460 control doesn’t allow spin speeds > 800 RPM, then
the Reduced Ironing setting has been turned on.
HINT: To exit the Reduced Ironing mode:
L When Start/Pause indicating light
flashes red, press Menu button until
Reduced Ironing screen appears.
L Press Select button until Reduced
Ironing has been turned off.
WFR 2460 Service Tips
WFR 2460 Service Tips
--
--
Low Spin Speeds
Low Spin Speeds
51
1st Edition/Revision 5 (1/20/04)