Filter
Top Products
WFL 2060 Service Tips
WFL 2060 Service Tips
--
--
Configuring
Configuring
Replacement Control Modules
Replacement Control Modules
42
Replacement WFL 2060 control modules (# 481304) aren’t configured. Please
follow these instructions to set on-board switches to configure replacement modules.
CAUTION: If settings aren’t done correctly,
washers can eventually be damaged!
CAUTION: Static electricity can damage
module components. Take care to shield
modules from static electricity.
Switch # Setting
1
off
2
on
3
on
4
off
5
on
6
off
7
off
8
on
Switch # Setting Notes
1
on
2
off
U.S. model variations enabled.
Switch S10
Switch S1
Notes
Sets spin speed to 1000 RPM max.
Sets panel buttons to Power Wash,
Rinse Plus & Quick Wash and
enables spin selector knob.
Sets hot water inlet on.
HINT: Modules
cannot be configured
using the washer
control panel.
1st Edition/Revision 5 (1/20/04)