Blomberg WNF 7361 SCE20 Washer User Manual


  Open as PDF
of 68
 
11
EN
Auxiliary function selection
Select the desired auxiliary functions before starting the
programme. Furthermore, you may also select or cancel
auxiliary functions that are suitable to the running programme
withoutpressingtheStart/Pausebuttonwhenthemachine
is operating. For this, the machine must be in a step before
the auxiliary function you are going to select or cancel.
Iftheauxiliaryfunctioncannotbeselectedorcanceled,light
of the relevant auxiliary function will blink 3 times to warn the
user.
C
Somefunctionscannotbeselectedtogether.Ifasecond
auxiliary function conflicting with the first one is selected
before starting the machine, the function selected
first will be canceled and the second auxiliary function
selection will remain active. For example, if you want to
select Quick Wash after you have selected the Prewash,
Prewash will be canceled and Quick Wash will remain
active.
C
An auxiliary function that is not compatible with the
programme cannot be selected. (See "Programme and
consumption table")
C
Auxiliary Function buttons may vary according to the
model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not
using the Prewash will save energy, water, detergent and
time.
C
Prewash without detergent is recommended for tulle
and curtains.
• Quick Wash
This function can be used in Cottons and Synthetics
programmes.Itdecreasesthewashingtimesandalsothe
number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
• Rinse Plus
This function enables the machine to make another rinsing in
addition to the one already made after the main wash. Thus,
the risk for sensitive skins (babies, allergic skins, etc.) to be
effected by the minimal detergent remnants on the laundry
can be reduced.
• Anti-Creasing
This function creases the clothes lesser when they are being
washed.Drummovementisreducedandspinningspeedis
limitedtopreventcreasing.Inaddition,washingisdonewitha
higher water level.
• Rinse Hold
Ifyouarenotgoingtounloadyourclothesimmediatelyafter
the programme completes, you may use rinse hold function
to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water
inthemachine.PressStart/Pausebuttonafterthisprocess
if you want to drain the water without spinning your laundry.
Programme will resume and complete after draining the
water.
Ifyouwanttospinthelaundryheldinwater,adjusttheSpin
SpeedandpressStart/Pausebutton.
The programme resumes. Water is drained, laundry is spun
and the programme is completed.
• Soaking
The Soaking auxiliary function ensures better removal of
stains ingrained into the clothes by holding them in the
detergent water prior to startup of the programme.
Delayed Start
WiththeDelayedStartfunctionthestartupoftheprogramme
maybedelayedupto19hours.Delayedstarttimecanbe
increasedbyincrementsof1hour.
C
DonotuseliquiddetergentswhenyousetDelayed
Start! There is the risk of staining of the clothes.
Open the loading door, place the laundry and put detergent,
etc. Select the washing programme, temperature, spin speed
and,ifrequired,theauxiliaryfunctions.Setthedesiredtimeby
pressingtheDelayedStartbutton.PressStart/Pausebutton.
Thedelayedstarttimeyouhavesetisdisplayed.Delayedstart
countdown starts. “_” symbol next to the delayed start time
moves up and down on the display.
C
Additional laundry may be loaded during the delayed
start period.
At the end of the countdown, duration of the selected
programme will be displayed. “_” symbol will disappear and
the selected programme will start.
Changing the Delayed Start period
Ifyouwanttochangethetimeduringcountdown:
PressDelayedStartbutton.Timewillincreaseby1houreach
timeyoupressthebutton.Ifyouwanttodecreasethedelayed
starttime,pressDelayedStartbuttonrepeatedlyuntilthe
desired delayed start time appears on the display.
Canceling the Delayed Start function
Ifyouwanttocancelthedelayedstartcountdownandstart
the programme immediately:
SettheDelayedStartperiodtozeroorturntheProgramme
Selectionknobtoanyprogramme.Thus,DelayedStart
functionwillbecanceled.TheEnd/Cancellightflashes
continuously. Then, select the programme you want to run
again.PressStart/Pausebuttontostarttheprogramme.
Starting the programme
PressStart/Pausebuttontostarttheprogramme.
Programmefollow-uplightshowingthestartupofthe
programme will turn on.
C
Ifnoprogrammeisstartedornokeyispressedwithin
1minuteduringprogrammeselectionprocess,the
machine will switch to Pause mode and the illumination
level of the temperature, speed and loading door
indicator lights will decrease. Other indicator lights and
indicators will turn off. Once the Programme Selection
knob is rotated or any button is pressed, indicator lights
and indicators will turn on again.
Child Lock
UseChildLockfunctiontopreventchildrenfromtampering
with the machine. Thus you can avoid any changes in a
running programme.
C
IftheProgrammeSelectionknobisturnedwhenthe
ChildLockisactive,"Con"appearsonthedisplay.
TheChildLockdoesnotallowanychangeinthe
programmes and the selected temperature, speed and
auxiliary functions.
C
Even if another programme is selected with the
ProgrammeSelectionknobwhiletheChildLockis
 previous next