A SERVICE OF

logo

Open as PDF
next previous
14 - EN
program has started and is still continuing
fades out.
Selecting or canceling an auxiliary
function in pause mode
Auxiliaryfunctionscanbecancelledor
selected in accordance with the step the
program is at.
Adding/removing laundry in pause mode
Thedoorcanbeopenedifthewaterlevelis
suitable.Thedoorlockedsymbolwilllight
upuntilthedoorissuitableforopening.This
symbolwillfadeoutassoonasthedooris
allowedtoopen.Laundrymaybeadded/
takenoutbyopeningthedoor.
Door lock
TheDoorLockedSymbollightsupwhenthe
loadingdoorislocked.Thissymbolwillflash
untilthedoorisallowedtoopen.Donotforce
thedooratthisstage.Thissymbolwillfade
out as soon as the door is allowed to open.
Youmayopenthedoorafterthesymbolfades
out.
Child-proof lock
Protecttheappliancefrombeingtampered
bychildrenbymeansofthechild-prooflock.
Inthiscase,nochangecanbemadeinthe
running program.
C
Yourmachinecanbeturnedonandoff
withOn/Offbuttonwhilethechild-proof
lockisactivated.Inthiscase,yourmachine
willresumeitsprogramwithchild-proof
lock activated.
Themachineisswitchedtochild-lockby
pressing the 2nd and 4th auxiliary functions
for3sec.“C:on”(Child-prooflockisactivated)
labelappearsonthedisplay.
Thesamesymbolwillalsobedisplayed
wheneveranybuttonispressedwhilethe
machineischild-locked.
Todeactivatethechild-prooflock,pressthe
2ndand4thauxiliaryfunctionbuttonsfor3
sec.
“C:OFF”(Child-prooflockisdeactivated)label
appears on the screen.
Ending the program through canceling
“Start/Pause/Cancel”buttonispressedfor3
secondstocanceltheprogram.Startsymbol
will flash during cancellation. After cancellation,
thesymbolofthecorrespondingstepatwhich
the cancellation was made will remain lit and
“End”willappearonthescreen.
End of program
Whentheprogramisfinished,thesymbols
of the relevant steps will remain lit up and
the auxiliary function, spin and temperature
dataselectedatthestart-upoftheprogram
willremainselected.“End”willappearonthe
display.