Filter
Top Products
EN
52
will go off and the relevant Programme
follow-up light will come on according to
the selected Programme.
Changing the delay time
If you want to change the time during
the countdown:
1. Press “Start/Pause/Cancel” button.
“:” in the middle of the screen will stop
flashing.
2. Pres “Time Delay” button to adjust
the desired time delay.
3. Press “Start/Pause/Cancel” button.
4. The “:” in the middle of the displayed
time delay will start flashing.
Canceling the time delay
If you want to cancel the time delay
countdown and start the Programme:
1. Press “Start/Pause/Cancel” button.
The “:” in the middle of the displayed
time delay will stop flashing.
2. Pres “Time Delay” button to decrease
the time delay. “0:00” will appear on the
display.
3. Press "Start/Pause/Cancel" button to
start the Programme.
Starting the Programme
1. Press "Start/Pause/Cancel" button to
start the Programme.
2. Programme follow-up lamp showing
the startup of the Programme will light
up.
Progress of Programme
Progress of a running Programme
is shown through the Programme
follow-up indicator. At the beginning
of every Programme step, the relevant
indicator lamp will light up and light of
the completed step will turn off. The
indicator that is lit up at the far right of
the series of indicator indicates the step
that is being carried out.
C
If the machine is not spinning,
the Programme may be in rinse
hold mode or the automatic
spin correction system has been
activated due to an excessive
unbalanced distribution of laundry in
the machine.
Changing the selections after
the Programme has started
Turning the Programme knob while the
Programme is in a normal flow will not
change the Programme.
Switching the machine to standby mode
Press “Start/Pause/Cancel” button
momentarily to switch your machine
to the standby mode. “Start/Pause/
Cancel” lamp will start flashing to
indicate that the machine is switched to
standby mode.
Selecting or canceling an auxiliary function
in standby mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
Programme is at.
Adding/removing laundry in standby mode
The door can be opened if the water
level is suitable. “Ready” lamp will
flash until the door is allowed to open.
“Ready” lamp will light up continuously
when the door is allowed to open.
Laundry may be added / taken out by
opening the door. “Ready” lamp goes
off it he front door is not allowed to open
for safety reasons.
Door lock
The loading door can not be opened yet
due to safety reasons while the “Ready”
lamp is flashing. The loading door can
be opened once the “Ready” lamp
starts lighting up continuously.
Child-proof lock
This function protects the appliance
from being tampered by children. In
this case, all of the buttons are inactive
except On/Off button; by On/Off button
you can whether stop or resume (while
child-lock on) the Programme of your
machine.
The machine is switched to child-lock
by pressing the 1st and 2nd auxiliary
functions for 3 sec. “C on” (Child lock is
activated) label appears on the screen.