Filter
Top Products
13 - EN
Auxiliary function
Cancel audio warning
Your dryer will give an audio warning when the
programme comes to an end. If you do not
want to hear the audio warning, press “Cancel
Audio Warning” button. The relevant light
will turn on when this button is pressed and
an audio warning will not be given when the
programme comes to an end.
C You can select this function either before or
after the programme starts.
Warning indicators
C Warning indicators may differ according to
the model of your dryer.
Filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
C If the filter cleaning warning light lights up
continuously, please refer to, “Suggested
solutions for problems”.
Water tank
Warning light starts flashing when the tank is
filled with water. The dryer stops operating if
the warning light turns on when a programme
is running. Drain the water in the water tank
to restart the dryer. Press “Start/Pause/
Cancel” button to start the programme after
you have emptied the water tank. The warning
light turns off and the programme resumes
operating.
Time delay
If you wish to dry your clothes at a later time,
thanks to the time delay function, you can
delay the program start up to 3 hours, 6 hours
or 9 hours.
1. Open the loading door and put the laundry
in.
C Make sure that all air outlets are open,
door filter is cleaned and the water tank is
empty.
2. Set the drying program and, if required, the
auxiliary functions.
3. When the time programming button is
pressed once, a 3 hour delay is selected
and the relevant led lights. When the same
button is pressed again, 6 hours; and if
pressed once more, 9 hours delay will be
selected. If the time programming button
is pressed one more time, time delaying
function will be cancelled. Set the time
delay as you require.
4. Delayed operation of the selected program
is started by pressing the "Start/Pause/
Cancel" button after selecting the time
delay.
C Additional laundry may be loaded / taken
out during the time delay period.
C During the time delay period, laundry is
rotated for 4 seconds in every 10 minutes
to prevent creasing.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program:
1. Press “Start/Pause/Cancel” button for
about 3 seconds.
2. Press “Start/Pause/Cancel” button to start
the program right away.
Starting the programme
1. Press “Start/Pause/Cancel” button to start
the programme.
2. Light of the “Start/Pause/Cancel” button
will turn on to indicate that the programme
has started.
Progress of program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step, the
relevant indicator LED will light up and light of
the completed step will turn off.
“Drying”:
- Drying level will be illuminated during the
whole drying process until the drying
degree reaches “iron dry”.
“Iron Dry”:
- Starts to illuminate when the drying degree
reaches “iron dry” step and remains illuminated
until the next step.
“Ready to wear”:
Starts to illuminate when the drying degree
reaches “Ready to wear” step and remains
illuminated until the next step.
“Final / Anti-creasing”:
- Illuminates when the program comes to an
end and anti-creasing function is activated.
C If more than one LED light up or
flash concurrently, it means there is
malfunctioning or a failure (please see,
Solution suggestions for problems).
Changing the programme after it has
started
You can use this feature to dry your clothes
under higher or lower temperatures after your
dryer has started.
For example;
1. Press and hold the “Start/Pause/Cancel”
button for about 3 seconds to “Cancel”
the programme in order to select “Extra
Dry” programme instead of “Iron Dry”
programme.
2. Select the “Extra Dry” programme by
rotating the programme selection button.
3. Press “Start/Pause/Cancel” button to start
the programme.