Blomberg TAF 7230 A Clothes Dryer User Manual


  Open as PDF
of 44
 
14 - EN
Time delay
If you wish to dry your clothes at a later
time, thanks to the time delay function,
you can delay the program start up to 3
hours, 6 hours or 9 hours.
1. Opentheloadingdoorandputthe
laundry in.
C Makesurethatallairoutletsareopen,
door filter is cleaned and the water
tank is empty.
2. Set the drying program, temperature,
spin speed and, if required, the
auxiliary functions.
3. When the time programming button
is pressed once, a 3 hour delay is
selected and the relevant led lights.
When the same button is pressed
again, 6 hours; and if pressed once
more, 9 hours delay will be selected.
If the time programming button is
pressed one more time, time delaying
function will be cancelled. Set the time
delay as you require.
4. Delayed operation of the selected
program is started by pressing the
"Start/Pause/Cancel"buttonafter
selecting the time delay.
C Additional laundry may be loaded /
taken out during the time delay period.
Canceling the time delay
If you want to cancel the time delay
countdownandstarttheprogram:
1. Press“Start/Pause/Cancel”button
forabout4seconds.The“:”inthe
middle of the screen will stop flashing.
“Start/Pause/Cancel”lightwillgooff
and the remaining time on the screen
disappears.
2. Press"Start/Pause/Cancel"buttonto
start the program right away.
Starting the Program
1. Press"Start/Pause/Cancel"buttonto
Auxiliary function
Cancel Audio Warning
Yourmachinewillsendoutanaudio
warning when the program comes to an
end. If you do not want to hear this
buzzing,youneedtopressthe“Cancel
Audio Warning” button. The relevant LED
will light up when this button is pressed
and an audio warning will not be given
when the program comes to an end.
C Youcanselectthisfunctioneither
before or after the program starts.
Warning indicators
C
Warning indicators may differ
according to the model of your
machine.
Child-proof lock
A warning LED will light up as long as the
child-proof lock remains activated.
Filter cleaning
A warning LED will light up to remind filter
cleaning after the program finishes.
C If the filter cleaning warning lights up
continuously,pleasereferto,“Solution
suggestions for problems”.
Tank full
A warning LED will light up at the end of
the program or when the tank is full with
water. The machine stops operating
when this warning LED lights up during a
program running. To restart the machine,
please drain the water in the water tank.
Press"Start/Pause/Cancel"buttontostart
the program after you have emptied the
water tank. The warning LED goes off and
the program resumes operating.
Cleaning the condenser.
It will light up periodically after maximum 5
drying cycles for the purpose of reminding.
In this case and after drying, clean as
explainedinthesection“Maintenanceand
Cleaning”.
 previous next