Filter
Top Products
Washing Machine /User’s Manual
19 / EN
Operating the product
5.2 Preparing the machine
C
Figures in this manual are schematic and
may not match the product exactly.
• Power Button
Press this button once to
operate. Press it again to
turn the power off.
• Start/Pause Button
Use to pause and restart
the operation. To change
the washing procedure
during an operation,
press this button to stop,
and again to restart after
changing the procedure.
• Program Select Button
Each time the button is
pressed, the washing
program changes.
• Water Supply Button (OPTION)
Each time this button is
pressed, the type of water
is selected as follows,
Cold / Hot / Warm
Cold: No light
Warm: Red light
Hot: Flashin red light
• Remaining Time, Delay Start Time, Error
Display
Displays the remaining
wash time. Displays the
reserved delay start time.
Displays the error state if
a problem occurs in the
washing machine so that
you can take action.
• Delay Start Time Button
Adjusts delay start time.
max. 18 h
• Water Level Button
The water level is
automatically adjusted.
However, you can select
the water level manually
by pressing this button.
The water level button
only can be active during
standby status, water level
can be changed before
start to running; and you
can press the start/pause
button then change water
level while machine is
running, press start/pause
again back to work after
finish water level setting.
Displays selected
program’s default water
level.
Low / Few / Medium /
High