Washing Machine /User’s Manual
13 / EN
Installation
3.7 Connecting to the water supply
Important:
• The water supply pressure required to run the
machine must be 1-10 bar (0,1 – 1 MPa).
• Connect the special hoses supplied with the
machine to the water intake valves on the
machine.
• Connect the special hoses supplied with the
product left)( to the water inlets on the product.
Redhosemax.60( ºC )right( blue hose ,is for hot
water inlet )max.25(ºCis for cold water inlet. )
• If you are going to use your double water-inlet
machine as a single (cold) water-inletunit, you
must install the stopper*, supplied with your
machine to the hot water valve.
• If you want to use both water inlets of the
product, you can connect the hot water hose
after removing the stopper and gasket group
from the hot water valve.
• Applies for the products supplied with a blind
stopper group.
• Models with a single water inlet should not be
connected to the hot water tap.
• When returning the appliance to its place after
maintenance or cleaning, care should be taken
not to fold, squeeze or block the hoses.
3.8 Using detergent /softener
and bleach nector
When using detergent, softener, starch, fabric dye,
bleachor limescale remover read the anufacturer’s
instructionson the package carefully and follow
the suggested dosagevalues. Use measuring cup
if available.
1
3
2
Type1
Type1:
1.for laundry detergent
2.for softener
3.for bleach
1
2
Type2
Type2:
1.for laundry detergent
2.for bleach
1
2
Type3
Type3:
1.putting laundry
detergent into drum
2.for bleach
directly