Filter
Top Products
Washing Machine /User’s Manual
31 / EN
Operating the product
5.14 Loading door lock
There is a locking system on the loading door of
the machine that prevents opening of the door in
cases when the water level is unsuitable.
"Door Locked" symbol appears on the display
when the loading door is locked.
5.15 Changing the selections after
the programme has started
Adding laundry after the programme has
started:
If the water level in the machine is suitable when
you press Start / Pause button, loading door
symbol will flash on the display until the loading
door is opened and will disappear when the
loading door is opened.
1888
88:88
88
C
0
If the water level in the machine is not suitable
when you press Start / Pause button, the loading
door symbol remain lit on the display.
1888
88:88
88
C
0
Switching the machine to pause mode:
Press the Start / Pause button to switch the
machine to pause mode. Pause symbol will flash
on the display.
1888
88:88
88
C
0
Changing the programme selection after
programme has started:
The programme change is not allowed when the
current programme is running.
You can select the new programme after
switching the current programme to standby.
C
The selected program starts anew.
Changing the auxiliary function, speed and
temperature
Depending on the step the programme has
reached, you can cancel or activate the auxiliary
functions. See, "Auxiliary function selection".
You can also change the speed and temperature
settings. See, "Spin speed selection" and
"Temperature selection"
C
The loading door will not open if the
water temperature in the machine is
high or the water level is above the door
opening.
5.16 Child Lock
Use Child Lock function to prevent children from
tampering with the machine. Thus you can avoid
any changes in a running programme.
C
You can switch on and off the machine
with
On / Off button when the Child
Lock is active. When you switch on the
machine again, programme will resume
from where it has stopped.
C
When the child lock is enabled, an audio
warning will be given if the buttons are
pressed. Audio warning will be canceled
if the buttons are pressed 5 times
consecutively.
To activate the Child Lock:
Press and hold Auxiliary Function button 2
for 3 seconds. After the countdown as “CL 3-2-
1" on the display is over, "Child Lock Enabled"
appears on the display. You can release Auxiliary
Function button 1 when this warning is
displayed.