27 / EN
Washng Machne / User’s Manual
Problem Reason Soluton
Foam is overflowing from the
detergent drawer.
Too much detergent is used. Mx 1 tablespoonful softener and ½ l water
and pour nto the man wash compartment of
the detergent drawer.
Put detergent nto the machne sutable
for the programmes and maxmum
loads ndcated n the “Programme and
consumpton table”. When you use addtonal
chemcals (stan removers, bleachs and etc),
reduce the amount of detergent.
Laundry remains wet at the end
of the programme. (*)
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
Use recommended amount of detergent.
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the
machine and to its surrounding environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.4.2
A
CAUTION: If you cannot eliminate the problem although you follow the instructions in this section, consult your
dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.