Filter
Top Products
25 / EN
Washng Machne / User’s Manual
Problem Reason Soluton
Programme time does not
countdown. (On models with
display) (*)
Timer may stop during water intake. Tmer ndcator wll not countdown untl the
machne takes n adequate amount of water.
The machne wll wat untl there s suffcent
amount of water to avod poor washng
results due to lack of water. Tmer ndcator
wll resume countdown after ths.
Timer may stop during heating step. Tmer ndcator wll not countdown untl the
machne reaches the selected temperature.
Timer may stop during spinning step. Automatc unbalanced load detecton system
mght be actvated due to the unbalanced
dstrbuton of the laundry n the drum.
Programme time does not
countdown. (*)
There might be unbalanced load in the machine. Automatc unbalanced load detecton system
mght be actvated due to the unbalanced
dstrbuton of the laundry n the drum.
Machine does not switch to
spinning step. (*)
There might be unbalanced load in the machine. Automatc unbalanced load detecton system
mght be actvated due to the unbalanced
dstrbuton of the laundry n the drum.
The machine will not spin if water is not drained
completely.
Check the flter and the dranng hose.
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
Use recommended amount of detergent.
Washing performance is poor:
Laundry turns gray. (**)
Insufficient amount of detergent has been used
over a long period of time.
Use the recommended amount of detergent
approprate for water hardness and the
laundry.
Washing was made at low temperatures for a
long time.
Select the proper temperature for the
laundry to be washed.
Insufficient amount of detergent is used with
hard water.
Usng nsuffcent amount of detergent wth
hard water causes the sol to stck on the
cloth and ths turns the cloth nto gray n
tme. It s dffcult to elmnate grayng once
t happens. Use the recommended amount
of detergent approprate for water hardness
and the laundry.
Too much detergent is used. Use the recommended amount of detergent
approprate for water hardness and the
laundry.
Washing performance is poor:
Stains persist or the laundry is
not whitened. (**)
Insufficient amount of detergent is used. Use the recommended amount of detergent
approprate for water hardness and the
laundry.
Excessive laundry was loaded in. Do not load the machne n excess. Load wth
amounts recommended n the "Programme
and consumpton table".
Wrong programme and temperature were
selected.
Select the proper programme and
temperature for the laundry to be washed.
Wrong type of detergent is used. Use orgnal detergent approprate for the
machne.
Too much detergent is used. Put the detergent n the correct
compartment. Do not mx the bleachng
agent and the detergent wth each other.
Washing performance is poor:
Oily stains appeared on the
laundry. (**)
Regular drum cleaning is not applied. Clean the drum regularly. For ths, please
see 4.4.2.
Washing performance is poor:
Clothes smell unpleasantly. (**)
Odours and bacteria layers are formed on the
drum as a result of continuous washing at lower
temperatures and/or in short programmes.
Leave the detergent drawer as well as
the loadng door of the machne ajar after
each washng. Thus, a humd envronment
favorable for bactera cannot occur n the
machne.
Colour of the clothes faded. (**)
Excessive laundry was loaded in. Do not load the machne n excess.
Detergent in use is damp. Keep detergents closed n an envronment
free of humdty and do not expose them to
excessve temperatures.
A higher temperature is selected. Select the proper programme and
temperature accordng to the type and
solng degree of the laundry.