Filter
Top Products
28 / EN
Washing Machine /User’s Manual
Operating the product
Also, when the loading door is ready to be
opened, Loading Door light will also illuminate
continuously in addition to the programme step
light.
Changing the speed and temperature settings
for auxiliary functions
Depending on the step the programme has
reached, you may cancel or activate the auxiliary
functions; see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
C
If no change is allowed, the relevant light
will flash for 3 times.
Adding or taking out laundry
1. Press the Start / Pause button to switch the
machine to pause mode. The programme
follow-up light of the relevant step during which
the machine was switched into the pause mode
will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the
laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions,
temperature and speed settings if necessary.
6. Press Start / Pause button to start the machine.
5.16 Canceling the programme
To cancel the programme, turn the Programme
Selection knob to select another programme.
Previous programme will be canceled. End /
Cancel light will flash continuously to notify that
the programme has been canceled.
Pump function is activated for 1-2 minutes
regardless of the programme step, and whether
there is water in the machine or not. After this
period, your machine will be ready to start with the
first step of the new programme.
C
Depending on the step where the
programme was canceled in, you may
have to put detergent and softener again
for the programme you have selected
anew.
5.17 End of programme
“End” appears on the display at the end of the
programme.
1. Wait until the loading door light illuminates
steadily.
2. Press On / Off button to switch off the machine.
3. Take out your laundry and close the loading
door. Your machine is ready for the next
washing cycle.
5.18 Your machine is equipped
with a “Standby Mode”
In case of not starting any programme or waiting
without making any other operation when the
machine is turned on by On/Off button and while
it is in selection step or if no other operation is
performed approximately 2 minutes after the
programme you selected has come to an end,
your machine will automatically switch to energy
saving mode. Brightness of indicator lights will
decrease. Also, if your product is equipped with
a display showing the programme duration, this
display will completely turn off. In case of rotating
the Programme Selection knob or pressing any
button, lights and display will restore to their
previous condition. Your selections made while
exiting the energy saving mode may change.
Check the appropriateness of your selections
before starting the programme. Readjust if
necessary. This is not a fault.