Filter
Top Products
22 / EN
Washing Machine /User’s Manual
Operating the product
• Darkcare
Use this programme to wash your dark coloured
laundry, or the coloured laundry that you do not
want them get faded. Washing is performed with
less mechanical movements at low temperature.
It is recommended to use liquid detergent or wool
shampoo for dark coloured laundry.
• Mixed Fabrics
Use this programme to wash your cotton and
synthetic clothes together without sorting them.
• Shirts
Use this programme to wash the shirts made of
cotton, synthetic and synthetic blended fabrics
together.
• Sports
Use this programme to wash your garments that
are worn for a short time such as sportswear. It is
suitable to wash little amount of cotton / synthetic
blended garments.
5.6 Special programmes
For specific applications, select any of the
following programmes.
• Rinse
Use this programme when you want to rinse or
starch separately.
• Spin + Drain
Use this programme to apply an additional spin
cycle for your laundry or to drain the water in the
machine.
Before selecting this programme, select the
desired spin speed and press Start / Pause
button. First, the machine will drain the water
inside of it. Then, it will spin the laundry with the
set spin speed and drain the water coming out of
them.
If you wish to drain only the water without
spinning your laundry, select the Pump+Spin
programme and then select the No Spin function
with the help of Spin Speed Adjustment button.
Press Start / Pause button.
C
Use a lower spin speed for delicate
laundries.
5.7 Temperature selection
Whenever a new programme is selected,
the maximum temperature for the selected
programme appears on the temperature indicator.
To decrease the temperature, press the
Temperature Adjustment button. Temperature will
decrease gradually.
C
If the programme has not reached
the heating step, you can change the
temperature without switching the
machine to Pause mode.
5.8 Spin speed selection
Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the spin speed
indicator.
To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed decreases
gradually. Then, depending on the model of the
product, "Rinse Hold" and "No Spin" options
appear on the display. See "Auxiliary function
selection" section for explanations of these
options.
C
If the programme has not reached the
spinning step, you can change the speed
without switching the machine to Pause
mode.