Filter
Top Products
EN
23
special programs.
•
If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated due to an
excessive unbalanced distribution of
laundry in the machine.
Changing the selections after
the program has started
The selected spin speed and program
temperature fade out. An empty frame
appears.
Whenthe“Programselection”buttonis
brought to the appropriate position, rpm
and temperature data reappear.
Switching the machine to
standby mode
The machine is switched to standby
modebypressing“Start/Pause/Cancel”
button momentarily. The Standby symbol
which indicates the machine is in standby
mode lights up and the start symbol that
shows the program has started and is still
continuing fades out.
F2
F4
F1
F3
Selecting or cancelling an auxiliary
function in pause mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
program is at.
Adding/removing laundry in pause
mode
The door can be opened if the water
level is suitable. The door locked symbol
will light up until the door is suitable for
opening. This symbol will fade out as soon
as the door is allowed to open. Laundry
may be added / taken out by opening the
door.
Door lock
The Door Locked Symbol lights up when
the loading door is locked. This symbol
will flash until the door is allowed to open.
Do not force the door at this stage. This
symbol will fade out as soon as the door is
allowedtoopen.Youmayopenthedoor
after the symbol fades out.
Child-proof lock
Protecttheappliancefrombeingtampered
by children by means of the child-proof
lock. In this case, no change can be made
in the running program.
C
Yourmachinecanbeturnedonand
offwithOn/Offbuttonwhilethechild-
proof lock is activated. In this case,
your machine will resume its program
with child-proof lock activated.
The machine is switched to child-lock
by pressing the 2nd and 4th auxiliary
functionsfor3sec.“C:on”(Child-proof
lockisactivated)labelappearsonthe
display.
The same symbol will also be displayed
whenever any button is pressed while the
machine is child-locked.
To deactivate the child-proof lock, press
the 2nd and 4th auxiliary function buttons
for 3 sec.
“C:OFF”(Child-prooflockisdeactivated)
label appears on the screen.
Ending the program through
cancelling
“Start/Pause/Cancel”buttonispressed
for 3 seconds to cancel the program.
Start symbol will flash during cancellation.
After cancellation, the symbol of the
corresponding step at which the
cancellation was made will remain lit and
“End”willappearonthescreen.