Beko WMI 61241 Washer User Manual


  Open as PDF
of 48
 
EN
21
Auxiliary functions
Auxiliary Function Selection Buttons
a b c d
• Dependingontheprogram,youcan
select the desired auxiliary function by
pressing the buttons a, b, c,d.
• Selecttherequiredauxiliaryfunctions
before starting the program.
• Somecombinationscannotbe
selectedtogether.Ex.:Pre-washand
Quick Wash.
• Symboloftheselectedauxiliary
function will light up.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and the
last auxiliary function selection will remain
active.
Ex.:Ifyouwanttoselectpre-washfirst
and then quick wash, pre-wash will be
cancelled and quick wash will remain
active.
Auxiliary function that is not compatible
with the program cannot be selected.
(see,“ProgramSelectionTable”)
• Prewash
Whenyouselectthisfunction(a),the
displaywillindicate“F1”symbol.
• Apre-washisonlyworthwhilefor
heavily soiled laundry. Without
pre-wash you save energy, water,
detergent and time.
• Pre-washwithoutdetergentis
recommended for lace and curtains.
• Quick Wash
Withthisfunction(b),thewashtimeis
shortened.“F2”symbollightsuponthe
display.
• Usethisfunctionforsmalleramounts
or slightly soiled laundry.
• Extra Rinse
Whenthisfunction(c)isselected,washing
and rinsing is performed with plenty
ofwater.“F3”symbollightsuponthe
display.
• Anti-Creasing
Withthisfunction(d),drummovement
will be lessened to prevent creasing and
spinning speed is limited. In addition,
washing is carried out at a higher water
level.“F4”symbollightsuponthedisplay.
• Usethisfunctionfordelicatelaundry
that crease easily.
C
Whenever you select this auxiliary
function, load your machine with half
of the maximum laundry specified in
the program table.
• Rinse Hold
If you are not going to unload your clothes
immediately after the program completes,
you may use rinse hold function and keep
your laundry in the final rinsing water in
order to prevent them become creased
when there is no water in the machine.
Press“Start/Pause”buttonafterthis
process if you want to drain the water
withoutspinning.Programresumes.Your
machine drains the water and program
completes.
If you want to spin your laundry that you
leftinwater:
- Adjust the spin speed.
-PressStart/Pausebutton
Programresumes.Yourmachinedrains
the water, spins the laundry and program
completes.
Time display
The display shows the time remaining for
the program to complete while a program
is running. Time is displayed in hours and
minutes as “01:30”.
 previous next