Beko WMG 10454 W Washer/Dryer User Manual


 
32 / EN
Washing Machine / User’s Manual
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save
energy, water, detergent and time.
• Quicker Wash
This function can be used in Cottons and Synthetics programmes. It decreases the
washing times and also the number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine with half of the maximum laundry specified in the
programme table.
• Extra Rinse
This function enables the machine to make another rinsing in addition to the one already
made after the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to
be effected by the minimal detergent remnants on the laundry can be reduced.
• Anti-Creasing
This function creases the clothes lesser when they are being washed. Drum movement is
reduced and spin speed is limited to prevent creasing. In addition, washing is done with a
higher water level.
• Rinse Hold
If you are not going to unload your clothes immediately after the programme completes,
you can use rinse hold function to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water in the machine. Press Start
/ Pause button after this process if you want to drain the water without spinning your
laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start /
Pause button.
The programme resumes. Water is drained, laundry is spun and the programme is
completed.
• Night Mode
Use to wash the cottons with lesser energy consumption and silently. Spin steps are
cancelled for a silent washing and the cycle ends with the Rinse Hold step. After
completion of the programme, run Spin cycle to spin the laundry.
Time display
Remaining time for the completion of the programme while it is running is displayed as
“01:30” in hours and minutes format.
C
Programme time may differ from the values in the "Programme and consumption table" depending on
the water pressure, water hardness and temperature, ambient temperature, amount and the type of
laundry, auxiliary functions selected and the changes at the mains voltage.