Beko WM 5140 S Washer User Manual


  Open as PDF
of 36
 
EN
21
auxiliary function, but you cannot
select pre-wash.
C The spin speed and temperature
which are selected first will keep on
being valid even if the position of the
spin speed or temperature selection
knobischanged.Press“Start/
Pause/Cancel”buttonandswitch
themachineto“Pause”modein
order to change the spin speed or
temperature. New spin speed or
temperature can be selected.
Adding/removing laundry in standby
mode
If you want to add more laundry into the
machine after the washing cycle has
started,putthemachineinto“Pause”
modebypressingthe“Start/Pause/
Cancel”button.The“Ready”lampon
the program follow-up indicator will light
up after 1-2 minutes if the water level in
the machine is suitable. Laundry may be
added or taken out by opening the door.
Ifthe“Ready”lampdoesnotlightup
continuously at the end of this time, the
water level in the machine is not suitable
andlaundrycannotbeadded.Youcan
resume the program by pressing the
“Start/Pause/Cancel”buttonagain.
Child-proof lock
There is a childproof lock to prevent
any program interruption because of
pressing the keys while the program is
on. In order to activate the childproof
lock, press on the 1st and 2nd
auxiliary function keys from the left
simultaneously for 3 seconds after
the washing program has started.
1st auxiliary function light will flash
continuously.
To start a new program after the
program is over or to interfere the
program, childproof lock should be
deactivated. To deactivate the child-
proof lock, press the same buttons for
3 sec.
Ending the program through
canceling
The program which is selected first will
keep on going even if the position of the
program selection button is changed. A
new program can be selected or started
after“Programiscancelled”inorderto
change the washing program.
Tocancelanyselectedprogram;
• Press“Start/Pause/Cancel”button
for 3 seconds. At the end of this
time,“Start/Pause/Cancel”light
andalllightsgooffand“Spin”lamp
illuminates. If the door is unlocked,
all lights on the indicator will go off
andthe“Ready”lampwillilluminate.
Youcanselectandstartanew
programwhenthe“Ready”lightis
lit.
• The machine can drain all the water
or can take in water for 3 times at
most to cool down the clothes and
complete the draining process. Also
the“Spin”lightilluminatesifthe
cancellation process is activated
in the middle of the program.
The“Spin”lightgoesoffwhen
discharging process is completed.
The door can be opened and a new
program can be selected when the
“Lid”lampilluminates.
End of program
The“Ready”lampontheprogram
follow-up indicator will light up when
the program comes to an end. The
door can be opened and the machine
becomes ready for a second cycle.
Pressthe“On/Off”buttontoshutdown
the machine.
 previous next