Beko WM 5140 S Washer User Manual


  Open as PDF
of 36
 
EN
20
Set the time delay as you require.
4. Delayed operation of the selected
program is started by pressing the
“Start/Pause/Cancel”buttonafter
making the time delay selection.
C Morelaundrymaybeloaded/
removed during the time delay
period.
Changing and canceling the time
delay.
1. Pressthe“Start/Pause/Cancel”
button to switch the machine to
“Pause”mode.
2. Press“Start/Pause/Cancel”button
to start the program after making
the new time delay selection.
C In the event that any of the lights
of 3-6-9 options does not light up
after selecting the new time delay,
it means that time delay function is
cancelled.
Starting the Program
1. Press“Start/Pause/Cancel”button
to start the program.
2. “Start/Pause/Cancel”buttonwill
light up to indicate that the program
has started.
3. Thedoorislockedandthe“Ready”
light fades.
Progressing a program
Progressofarunningprogramisshown
through the program follow-up indicator.
At the beginning of every program step,
the relevant indicator lamp will illuminate
and the light of the completed step
will turn off. The symbol that is lit up
at the far right of the series of symbols
indicates the step that is being carried
out.
The“Wash”lightontheprogramfollow-
up indicator illuminates when “Start/
Pause/Cancel”buttonispressedafter
selectingthewashingprogram.“Spin”
lamp will light up at the final spin step.
The“Ready”lampwilllightupagain
when the program is over and the door
is unlocked.
Youcanputyourmachineinto“Pause”
modebypressingthe“Start/Pause/
Cancel”buttonwhenitisoperating.In
thiscase,“Start/Pause/Cancel”lightwill
flash.
C If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated because
of unbalanced distribution of laundry
in the machine.
Changing the program after
the program has started
Youcanusethisfeatureafteryour
machine has started to wash different
textile groups in the same batch
of clothes under higher or lower
temperatures.
Forexample;
Pressandholdthe“Start/Pause/
Cancel”buttonfor3secondsto
“Cancel”theprograminorderto
select“Cottons40”programinsteadof
“Cottons60”program.
Selectthe“Cottons40”programby
rotating the program knob.
Press“Start/Pause/Cancel”buttonto
start the program.
C The program which is selected
first will go on even if the program
selection button is moved and
another program mode is selected
while the machine is operating.
Youmustcanceltheongoing
program in order to change the
washingprogram.(See,Cancelinga
Program)
Selecting or cancelling an auxiliary
function/temperature/spin speed
1. Pressthe“Start/Pause/Cancel”
button to switch the machine to
“Pause”mode.
2. Change the auxiliary function’s
temperature and spin speed.
3. Press“Start/Pause/Cancel”button
to start the program.
C The selection to be made must be
appropriate. For example, if your
machine is on the main wash cycle,
you may select additional rinse
 previous next