Filter
Top Products
23
EN
simultaneously after washing programme
light flashes continuously.
To deactivate the Child Lock:
Child lock must be deactivated to start a
new programme after the programme has
finished or to interrupt a running programme.
st
and 2
nd
Function buttons for 3 seconds
simultaneously to disable child lock.
Progress of programme
Progress of a running programme can
be followed from the Programme Follow-
programme step, the relevant indicator light
will turn on and light of the completed step
will turn off.
To change the auxiliary function, speed and
temperature settings while a programme is
running, you need to switch the machine to
Pause mode. Press Start / Pause / Cancel
button to switch the machine into Pause
mode. In this case, Start / Pause / Cancel
light flashes.
If the machine does not pass to the
might be active or the automatic
unbalanced load detection system
might be activated due to the
unbalanced distribution of the laundry
in the machine.
Loading door lock
There is a locking system on the loading
door of the machine that prevents opening
of the door in cases when the water level is
unsuitable.
When machine is switched to Pause mode,
it checks the level of the water inside. If
the level is suitable, Loading Door light
the loading door can be opened.
If the Loading Door light is not on, Loading
Door cannot be opened. If you are obliged
to open the Loading Door while the
Loading Door light is off, you must cancel
the current programme; see "Cancelling the
programme".
Changing the selections after
programme has started
To change your settings after the programme
has started, you have to switch the
machine to Pause mode first.
Even if you select a new programme
by changing the position of the
Programme Selection knob while the
machine is running or in Pause mode,
the programme selected first will
continue. You must cancel the current
programme to change the washing
programme. See "Cancelling the
programme".
Changing the auxiliary function, speed
and temperature
Depending on the step the programme has
reached, you may cancel or activate the
selection".
You can also change the speed and
temperature settings; see, "Spin speed
selection" and "Temperature selection".
Adding or taking out laundry
switch the machine to pause mode.
2. Wait until the Loading Door can be
opened.
If the Loading Door light does not
the water level in the machine is not
suitable and laundry cannot be added.
You can resume the programme by
pressing Start / Pause / Cancel button.
3. Open the Loading Door and add or
take out the laundry.
temperature and speed settings if
necessary.
6. Press Start / Pause / Cancel button to
start the machine.