Beko DVTC 60 W Clothes Dryer User Manual


 
19
EN
Preparation and starting
1. Press the “On/Off” button.
2. Place the laundry in the machine.
3. Select the programme.
4. Close the loading door.
5. Press “Start/Pause/Cancel” button.
Cancelling a programme
A new programme can be selected and
started after “Programme cancel” is
activated in order to change the drying
programme.
In order to cancel the selected
programme, press “Start/Pause/Cancel”
button for about 3 seconds. The “Filter
cleaning and “0/ Anti-creasing” warning
LEDs will light up at the end of this period
for reminding purposes.
Adding laundry
In order to add laundry after the start-up
of the programme:
1. Press “Start/Pause/Cancel” button.
2. Open the loading door and put the
laundry in.
3. Close the loading door.
4. Press “Start/Pause/Cancel” button to
start the programme.
7 Quick instructions for daily use
Changing the programme after the
programme has started
You can use this feature after your
machine has started to dry your clothes
under higher or lower temperatures.
Press and hold the “Start/Pause/Cancel”
button for about 3 seconds to switch
the machine into the “Cancel” status in
order to change the programme. Change
the programme and press “Start/Pause/
Cancel” button to start it.
After the programme is finished
The “0/Anti-creasing” and “Filter cleaning”
warning LEDs on the programme
follow up indicator will light up when
the programme comes to an end. The
door can be opened and the machine
becomes ready for a second cycle.
1. Press the “On/Off” button to shut
down the machine.
2. Take out the laundry from the machine.
3. Check if there are any foreign objects
in the machine.
4. Clean the filter after drying.