Beko DRCS 68 W Clothes Dryer User Manual


 
20 - EN
7 Quick instructions for daily use
Preparation and starting
1. Press the “On/Off” button.
2. Place the laundry in the machine.
3. Select the programme.
4. Close the loading door.
5. Press “Start/Pause/Cancel” button.
Cancelling a programme
A new programme can be selected and
started after “Programme cancel” is
activated in order to change the drying
programme.
In order to cancel the selected
programme, press “Start/Pause/Cancel”
button for about 3 seconds. The “Filter
cleaning”, “Water tank” and “End/ Anti-
creasing” warning LEDs will light up at the
end of this period for reminding purposes.
Adding laundry
In order to add laundry after the start-up
of the programme:
1. Press “Start/Pause/Cancel” button.
2. Open the loading door and put the
laundry in.
3. Close the loading door.
4. Press “Start/Pause/Cancel” button to
start the programme.
Changing the programme after the
programme has started
You can use this feature after your
machine has started to dry your clothes
under higher or lower temperatures.
Press and hold the “Start/Pause/Cancel”
button for about 3 seconds to switch
the machine into the “Cancel” status in
order to change the programme. Change
the programme and press “Start/Pause/
Cancel” button to start it.
After the programme is finished
The “End/Anti-creasing” and “Filter
cleaning” warning LEDs as well as “Water
tank” warning LED in some models on
the programme follow up indicator will
light up when the programme comes to
an end. The door can be opened and the
machine becomes ready for a second
cycle.
1. Press the “On/Off” button to shut
down the machine.
2. Take out the laundry from the machine.
3. Check if there are any foreign
substances in the machine.
4. Clean the filter after drying. Also drain
the water tank in models equipped
with a condenser.