Filter
Top Products
14
EN
“0” warning LED on the program follow-up
indicator will light up at the end of this period
for reminding purposes.
A As the inside of the machine will be
excessively hot when you cancel the program
while the machine is running, activate the
ventilation program to cool it down.
The machine will not start even if the “Start/
Pause/Cancel” button is pressed, unless the
program selection knob is returned to the
initial program. The paused program must be
cancelled in order to change the drying program.
End of program
The “Filter cleaning” and “Water tank” warning
LEDs as well as the “0” warning LED on the
program follow-up indicator will light up at the
end of the program. The door can be opened
and the machine becomes ready for a second
cycle.
Press the “On/Off” button to shut down the
machine.
C A 2-hour anti creasing program to prevent
laundry from creasing will be activated if you
do not take the laundry out after the program
has come to an end.
C Clean the filter after each drying (please see,
Filter cleaning).
C Drain the water tank after each drying (please
see, Water tank)