Filter
Top Products
The transport safety bolts must be removed before any operation of the machine. Bolt heads, marked “C”.
“C”, should be turned in a anti clockwise direction until the bolt can be partially withdrawn.
Remove transport safety bolts and rubber bushes by pulling outwards. (A up/down action and a small squirt of washing up
liquid should ease removal.)
Plastic plugs, supplied inside the protective bag and designated as “P”, should be placed in the safety bolt holes according
to the direction shown.
17
1. Removing transport safety bolts at the rear of the machine
Attention!
Please keep the safety bolts for future transportationand reinstate them before transporting your machine. Never
transport your machine without the transport bolts in position.
Never place your machine on a carpet. This prevents air circulation. The electrical components of the machine
may overheat and may cause damage.
6
Determining location and installation