Filter
Top Products
23 / 48 EN
Steam Iron Station / User Manual
5.1 Cleaning
A
WARNING: Do not un-
der any circumstance
use petrol, solvents,
abrasive cleaners, or
hard brushes to clean
this appliance.
A
WARNING: Do not
touch the hot soleplate
with bare hands direct-
ly after ironing. Danger
of Burns!
A
WARNING: Remove
limescale and other
mineral deposits from
the steam ironing sta-
tion when the descaling
indicator lights up.
B
WARNING: Never hold
the steam ironing sta-
tion under running wa-
ter and never submerge
it in water or any other
liquid.
A
WARNING: Never
clean the soleplate with
chemicals, steel wool,
wood or other abrasive
cleaning agents.
1. Prior to each cleaning, turn the
appliance off and disconnect the
power plug from the power outlet.
2. Let the steam iron cool down com-
pletely.
3. Use a slightly damp cloth to clean
the exterior of the iron. Then dry it
off thoroughly.
4. Wipe deposits off the soleplate with
a slightly damp cloth or if neces-
sary, with a mild, nonabrasive liquid
cleaner
5.2 Descaling
Note
• To maintain efficiency and extend
the operating life of your steam
ironing station and to avoid scale
particles on your garments, this
unit is equipped with a “Descaling”
warning indicator light “15”. This
light flashes on the control panel
“4” after about 100 minutes of op-
erating time.
• When the descaling indicator “15”
lights up, you can continue using
your iron normally but you need to
remember to descale the unit be-
fore using it the next time.
5 Maintenance and cleaning