Filter
Top Products
16 / 48 EN
Steam Iron Station / User Manual
3.1 Initial use
1. Remove all packaging materials, la-
bels and protective foil and dispose
of them according to the applicable
legal regulations.
2. Clean the outer parts of the appli-
ance as described in the section
“Cleaning and maintenance“.
3. Place the appliance on an even,
stable, dry and non-slip surface.
4. Place the iron onto the storage base
“10”.
C
During first use, a slight
odour may occur as a
result of manufacturing
residues being burnt
off. This is harmless
and will only last for a
short time. Ensure for
sufficient ventilation.
A
WARNING: Never im-
merse the steam iron-
ing station in water or
any other liquid. Do not
fill in the steam ironing
station with vinegar,
descaling agents,
starch, perfume or
ironing aids.
C
When ironing for the
first time, use an old,
clean cloth so that
manufacturing residues
can be removed from
the soleplate “9”.
3.2 Saving energy
This product has an ECO steam gen-
eration setting.
By using this setting, you can save
40% energy in comparison to the
maximum steam generation setting
with normal usage (Tested according
to EN 60311+A1 clause 11).
Many linen types can be ironed well
with ECO steam setting.
To save energy:
• You should use the appropriate heat
setting. If you don’t know the ap-
propriate heat setting, start from the
lowest heat setting and increase it
until linen can be ironed well.
• Your product can generate enough
steam in ECO mode to iron many
linen types. We suggest you to start
using your product with ECO setting.
If you don’t know the appropriate
steam setting, start from the lowest
steam setting and increase it until
linen can be ironed well.
• For better ironing, try using the
steam with pulse actions. Using
the steam continuously will cause
more moisture residue on your linen
and this may cause your linen to
wrinkle back while losing the extra
moisture.
3 Preparation